Jump to content


Photo

Licensing requirement for IPSEC Tunnel

Started by Alexander Steins , 12 March 2017 - 09:06 AM
1 reply to this topic

Alexander Steins Members

Alexander Steins
  • 54 posts

Posted 12 March 2017 - 09:06 AM

Hi,

 

I know that the Cloudbridge Connector is a platinum feature (which has to be enabled in Advanced Features).

 

But there is also a Setting in System -> Network -> IP Tunnels, wich is available when Cloudbridge Connector is not set to active.

What is the difference between both, and most importantly: 

With an Enterprise License, can I setup static IPSEC VPN to some other IPSEC Router, e.g. Cisco ASA, etc... ?

 

alex

 

 



Shalu Verma Citrix Employees

Shalu Verma
  • 36 posts

Posted 16 March 2017 - 05:23 PM

Regarding IP tunnel, As far as I know you don't need a Routing to establish the tunnel between the set up. 

 

Regarding CB connector, A CloudBridge Connector tunnel uses the following protocols:

·        Generic Routing Encapsulation (GRE) protocol

·         Open-standard IPSec Protocol suite, in transport mode

for detailed information, please check the below links

https://docs.citrix.com/en-us/netscaler/11/system/cloudbridge-connector-introduction.html

https://docs.citrix.com/en-us/netscaler/11/networking/ip-addressing/configuring-ip-tunnels.html

please ignore if you have already taken a look at this..