Jump to content


Photo

XenApp PVS 7.12 - Imaging Wizard not starting

Started by Andre Tsoy , 30 January 2017 - 09:53 PM
2 replies to this topic

Best Answer Andre Tsoy , 01 February 2017 - 05:33 PM

Hi all,

 

I have figured this out. As I was trying to replicate the same error on a different server, I found that I got the exact same error and the PhysicalDrive ID. 

It ended up being my Floppy Drive that had my Vmware drives for paravirtual disks. Once I removed the Floppy I was able to start the Imaging Wizard!

 

Simple as that!

Andre Tsoy Members

Andre Tsoy
  • 5 posts

Posted 30 January 2017 - 09:53 PM

Hi guys,

 

Having trouble launching Imaging Wizard on my "Golden Image XenApp" server.

It is running Windows 2012 R2 Datacentre with PVS Target Device x64 7.12

I have got Citrix VDA agent 7.12 installed on the same box as well.

 

This is a fresh install, so not sure what is going on here...

 

The first error i got was right after the install. The second error is when I try to open the imaging wizard - fatal error ...

 

I have checked event logs and there is nothing there...

Any ideas?

 

EDIT: I am running vSphere 5.5 with Paravirtual Disks and VMXNET3 NIC.

Attached Thumbnails

  • pvs error.PNG
  • pvs error startup.PNG


Andre Tsoy Members

Andre Tsoy
  • 5 posts

Posted 01 February 2017 - 03:22 PM

Found a log for Imaging Wizard:

 

02/01/17 09:16:42: Provisioning Services 7.12.0 Copyright © 2001-2016 Citrix Systems, Inc. All rights reserved.
02/01/17 09:16:42: Microsoft Windows 6.2.9200 Server
02/01/17 09:16:42: Suite=0x00000090
02/01/17 09:16:42: Processor Architecture: x64
02/01/17 09:16:42: Number of processors: 2
02/01/17 09:16:42: WindowsFreePercentage that can be set in [parameters] section of P2PVS.ini: 25
02/01/17 09:16:42: PartitionOffsetBase that can be set in [parameters] section of P2PVS.ini: 1048576
02/01/17 09:16:42: VolumeDiscoveryTimeoutAsSeconds that can be set in [parameters] section of P2PVS.ini: 30
02/01/17 09:16:42: VolumeShadowCopyPollTimeAsMs that can be set in [parameters] section of P2PVS.ini: 0
02/01/17 09:16:42: A Provisioning Services vDisk was not found.
02/01/17 09:16:42: Failed to open disk \\.\PhysicalDrive4294967295. The system cannot find the file specified. (0x00000002)


Andre Tsoy Members

Andre Tsoy
  • 5 posts

Posted 01 February 2017 - 05:33 PM

Hi all,

 

I have figured this out. As I was trying to replicate the same error on a different server, I found that I got the exact same error and the PhysicalDrive ID. 

It ended up being my Floppy Drive that had my Vmware drives for paravirtual disks. Once I removed the Floppy I was able to start the Imaging Wizard!

 

Simple as that!


Best Answer